COMPASSi/trunk/code/inc/InlandModel/StabilityModelInterface/StabilityModel.h

#ifndef STABILITY_MODEL_H
#define STABILITY_MODEL_H

#include "DataManager.h"
#include "InlandModelGlobal.h"
#include "OCC/OCCModeling/DllImportOccModeling.h"
#include "ChangeFSPos.h"
#include "OptionDataColorSetting.h"
#include "CommandStreamProcessing.h"
#include "StabilityUndoRedoManager.h"


#ifdef __cplusplus
extern "C"
{
#endif

    struct ModelBase3D
    {
        int color; // 颜色
    };

    struct Triangle3D : public ModelBase3D
    {
        std::vector<double> v1; // 顶点1
        std::vector<double> v2; // 顶点2
        std::vector<double> v3; // 顶点3
        int id;
        int visible; // 可见性
    };

    struct Line3D : public ModelBase3D
    {
        int id;
        std::vector<double> dp;        // 插值点
        std::vector<double> src;       // 原始点
        int visible; // 可见性
    };

    struct m_Point3D : public ModelBase3D
    {
        std::vector<double> v1; // 起点
        int id;
        int visible; // 可见性
    };

    struct m_Solid : public ModelBase3D//实体
    {
        std::vector<double> v1; // 顶点1
        std::vector<double> v2; // 顶点2
        std::vector<double> v3; // 顶点3
        int id;
        int visible; // 可见性
    };
    struct m_mainbody : public ModelBase3D //主体
    {
        std::vector<double> v1; // 顶点1
        std::vector<double> v2; // 顶点2
        std::vector<double> v3; // 顶点3
        int id;
        int visible; // 可见性
    };

    struct m_space : public ModelBase3D //舱室
    {
        std::vector<double> v1; // 顶点1
        std::vector<double> v2; // 顶点2
        std::vector<double> v3; // 顶点3
        int id;
        int visible; // 可见性
        bool isunit; // 是否是单元舱室
    };

    struct m_Appendage : public ModelBase3D //附体
    {
        std::vector<double> v1; // 顶点1
        std::vector<double> v2; // 顶点2
        std::vector<double> v3; // 顶点3
        int id;
        int visible; // 可见性
    };

    // enum E_SHOW_OBJ_INFOR
    // {
    //     E_SHOW_OBJ_INFOR_COMMAND = 0,
    //     E_SHOW_OBJ_INFOR_XYZ,
    //     E_SHOW_OBJ_INFOR_RIB_CRD,
    //     E_SHOW_OBJ_INFOR_STATION_CRD,
    //     E_SHOW_OBJ_INFOR_LOCATIE_OBJ,
    //     E_SHOW_OBJ_INFOR_OBJ_CRD,
    //     E_SHOW_OBJ_INFOR_OBJ_V,
    //     E_SHOW_OBJ_INFOR_SIZE
    // };

    class INLAND_DLL_API_EXPORTS StabilityModel
    {
    public:
        static StabilityModel *getStabilityModelInstance();
        static void destroy();
        DataManager *getDataManagerPtr();
        static StabilityModel *getStabilityModelpPtr();

        void loadXLSXFile(const QString &filePath);

        void get3DObjColor(int type,int& iColor,bool& isShowName);

        void readFile(XMLFile_Type type, const QString &filePath);

        ///----------------------------------------稳性计算-----------------start-------------------------------////
        bool stabilityCalc(std::vector<string>& commandLines, E_AnalysisModuleOperation_Type type);
        bool stabilityCalcMainContent(std::vector<string>& commandLines);
        std::vector<string> GetStabNodeOnly(std::vector<string>& commandLines);
        void ExportBInfDef();
        void ExportXLabel();
        void CalFrame(std::map<int, double>& Frames);
        void ExportFrame(string ID, double X);
        void CalStation(std::map<double, double>& Stations);
        void ExportOffsetLabel();
        ///----------------------------------------稳性计算-----------------end-------------------------------////

        QString updateDelete3dToJson(vector<string>& names);
        QString updateDelete3dToJson(string& name);

        void update3dToJson(json& outjson, E_GEO_3D_OBJ_TYPE type, int id = 0);
        QString getUpdate3dToJson();
        QString getUpdate3dToJson(std::vector<int>& ids);
        QString getUpdate_UI_StateJson();

        void saveFile(QString& savefilePath);

        void modifyOutJson_color(json& j, const std::string& key, int new_color_value) ;

        void snap_point(SNAP_POINTS_Type iSelect, int &errorCode, QString &outMsg, QString &data, const QString &message);

        bool ShapeTom_mainBodyByFaceIndex(int &index, TopoDS_Shape &shape);

        bool ShapeToCellByFaceIndex(int &index, TopoDS_Shape &shape);

        bool ShapeToTriangleByFaceIndex(int &index, TopoDS_Shape &shape);

        std::vector<double> DiscretePoints(TopoDS_Edge &curve, double dAngle, double dTol);

        std::vector<double> DiscretePointsByAngle(Handle_Geom_BSplineCurve &curve, double dAngle, double dTol);

        bool ShapeToLineByFaceIndex(int &index, TopoDS_Shape &shape);

        bool ShapeTom_pointByFaceIndex(int &index, TopoDS_Shape &shape);

        bool ShapeToSolidByFaceIndex(int &index, TopoDS_Shape &shape);

        bool ShapeTom_spaceByFaceIndex(int &index, TopoDS_Shape &shape);

        bool ShapeTom_appendageByFaceIndex(int &index, TopoDS_Shape &shape);

        void ExportShapeToJsonFile();

        void ExportShapeToJSON_nolhmann(nlohmann::json& jsonOutput);

        void ExportHullToJSON_nolhmann(nlohmann::json& jsonOutput);

        std::string CurveTypeToString(GeomAbs_CurveType type);

        bool create_point(std::string& singlecmdstring, QString &outJsonData);

        
        bool create_line(std::string& singlecmdstring, QString &outJsonData);

        bool create_surface(std::string& singlecmdstring, QString &outJsonData);

        bool create_solid(std::string& singlecmdstring, QString &outJsonData);

        bool create_Hull(std::string& singlecmdstring, QString &outJsonData);

        bool create_unit_and_space(std::string& singlecmdstring, QString &outJsonData);

        bool create_Appendage(std::string& singlecmdstring, QString &outJsonData);

        void stab_model_editor_hydro_static(int &errorCode, QString &outMsg, QString &data, const QString &message);
        void stab_model_editor_tank_cap(int &errorCode, QString &outMsg, QString &data, const QString &message);
        void stab_model_editor_intact(int &errorCode, QString &outMsg, QString &data, const QString &message);
        void stab_model_editor_allow_kg(int &errorCode, QString &outMsg, QString &data, const QString &message);
        void stab_model_editor_damage(int &errorCode, QString &outMsg, QString &data, const QString &message);
        void stab_model_editor_damage_prob(int &errorCode, QString &outMsg, QString &data, const QString &message);
        void stab_model_editor_inclining(int &errorCode, QString &outMsg, QString &data, const QString &message);

        void stab_model_editor_check(int &errorCode, QString &outMsg, QString &data, const QString &message);
        void stab_model_editor_save(int &errorCode, QString &outMsg, QString &data, const QString &message);

        void InitGeometry();

        void InitHull();

        void analysis_show_tree(int &errorCode, QString &outMsg, QString &data, const QString &message);

        void hull_show_tree(int &errorCode, QString &outMsg, QString &data, const QString &message);

        bool cmd_copy(std::string& singlecmdstring, QString &outJsonData);
        bool cmd_trim(std::string& singlecmdstring, QString &outJsonData);
        bool cmd_mirror(std::string& singlecmdstring, QString &outJsonData);
        bool cmd_intersection(std::string& singlecmdstring, QString &outJsonData);
        bool cmd_join(std::string& singlecmdstring, QString &outJsonData);
        bool cmd_delete(std::string& singlecmdstring, QString &outJsonData);    
        
        void from(int &errorCode, QString &outMsg, QString &data, const QString &message);

        //bool setObjVisible(int id,int value);
        bool setObjVisible(std::string& singlecmdstring,  QString &outJsonData);
        //void setvisible(int &errorCode, QString &outMsg, const nlohmann::json &j, const QString &originalStr);
        bool showWindowsLog(QString& log);
        //log  不能有空格
        void addShowWindowsLog(QString log);


        //tool ship ------------start
        void tool_ship_prej_infor_from(const json& j);
        void tool_ship_prej_infor_to(json& j);

        void tool_ship_main_elements_from(const json& j);
        void tool_ship_main_elements_to(json& j);

        void tool_ship_hull_scale_from(const json& j);
        void tool_ship_hull_scale_to(json& j);
        //tool ship ------------end
        //bool Menu_toolbar_show_obj_infor(E_SHOW_OBJ_INFOR type,std::vector<int>& ids,QString& outStr );    //获取obj infor               
        bool Menu_toolbar_show_obj_infor_XYZ(std::vector<string>& ids,QString& outStr );                       //获取obj XYZ infor  
        bool cmd_tool_show_obj_command(std::string& singlecmdstring, QString &outJsonData);                 //获取命令
        bool cmd_tool_show_curve_rib_crd(std::vector<string>& ids,bool isShowCoordF,QString& outStr );                           //获取肋位号

        //import iges file
        long ImportIGES(const json& j);
        long ImportIGES(std::string fileName, int impType, vector<float> vTransfromParams, bool bIsAddMode);

        void ExportIGES(const json& j);

        void ImportDXF(QString filePath);

        void push_undo_redo_data(int icommandid, std::vector<IModel*>& data);
        void cmd_undo(QString& strDeleteJson, QString& strChangeJson);
        void cmd_redo(QString& strDeleteJson, QString& strChangeJson);

        //导入型值表
        //横向横剖线 命令集
        std::vector<std::string>& getTransverseProfile_commad();
        //梁拱命令
        std::vector<std::string>& getCamber_commad();
        //绘制纵剖线
        std::vector<std::string>& getLongitudinalProfile_commad();
        //水线
        std::vector<std::string>& getWaterLine_commad();
        //空间线
        std::vector<std::string>& getSpaceLine_commad();

        void setImportOffsetOption(ImportOffsetOption& _option);

        void autoAddExecutingCmdID()
        {
            if (m_pDataManager)
            {
                m_pDataManager->autoAddExecutingCmdID();
            }
        }

        void setCurentUsingFilePath(QString filePath)
        {
            m_strCurentUsingFilePath = filePath;
            if(m_pDataManager)
            {
                m_pDataManager->setCurentUsingFilePath(m_strCurentUsingFilePath);
            }
        }
        QString getCurentUsingFilePath()
        {
            return m_strCurentUsingFilePath;
        }
    private:
        StabilityModel();
        ~StabilityModel();
        StabilityModel(const StabilityModel &) = delete;
        StabilityModel &operator=(const StabilityModel &) = delete;
        
    private:
        static StabilityModel *m_pStabilityModel;
        DataManager *m_pDataManager = nullptr;
        OCCStructDataMD *m_pDataMD = nullptr;
        std::map<string, std::vector<m_Solid>> m_solidsByFaceIndex;
        std::map<string, std::vector<Triangle3D>> m_trianglesByFaceIndex;
        std::map<string, std::vector<Line3D>> m_linesByFaceIndex;
        std::map<string, std::vector<m_Point3D>> m_pointByFaceIndex;
        std::map<string, std::vector<m_mainbody>> m_mainBodyByFaceIndex; //主体
        std::map<string, std::vector<m_space>> m_spaceByFaceIndex; //舱室+单元体 ，tpye 0是舱室，1是单元体
        std::map<string, std::vector<m_Appendage>> m_appendageByFaceIndex; //附体

        QString m_strCurentUsingFilePath = "";
        XMLFile_Type m_eLoadDataType;


        
    };

#ifdef __cplusplus
}
#endif

#endif // Stability_MODEL_H