#pragma once

#include "OCCStructDataMD.h"
#include "InterfaceCal.h"
#include "OCC/OCCLib/Calculation.h"
#include "OCC/OCCLib/Geometry.h"
#include "nlohmann/json.hpp"
#include "Common/BusinessGlobal.h"
#include <QList>
//#define DLLEXPORT extern "C" __declspec(dllexport)


namespace OCCModeling
{

/*************************** Interface Definition *****************************/

//******************** Display *************************
//*** ReInit Data：重新Load数据时调用 ***
DLLEXPORT void ReInitData();

DLLEXPORT BOOL AddObjAppendage(int cmdID,
	vector<int> order,
	vector<Appendage> &apd);

DLLEXPORT BOOL AddObjSpace(int cmdID,
	vector<int> order,
	vector<Space> &sp);

DLLEXPORT BOOL AddObjHull(int cmdID,
	vector<int> order,
	vector<Hull> &hull);

//*** DeleteObj：删除数据时调用 ***
DLLEXPORT BOOL DeleteObj(int cmdID,
	vector<int> order,
	vector<int> del);


//*** AddObj：加载数据时调用 图元验证生成***
DLLEXPORT BOOL AddObj(int cmdID,
					  vector<int> order,
					  vector<Point3D> &pnt,
					  vector<Curve> &crv,
					  vector<Surface> &srf,
					  vector<Solid>& sld
					  // int norder, int order[] ,
					  //                     int ndel, int del[],
					  // 					int npnt,Point3D pnt[],
					  // 					int ncrv,Curve crv[],
					  // 					int nsrf,Surface srf[],
					  // 					int nsld,Solid sld[],
					  // 					int nmds, MainDeckSurf mds[],
					  //                     int nss, ShellSurf ss[],
					  //                     int nds, DeckSurf ds[],
					  //                     int nbs, BoundSurf bs[],
					  //                     int nsds, SubdivSurf sds[],
					  //                     int nocr, OpenCargoRegion ocr[],
					  //                     int nsp, Space sp[],
					  //                     int napd, Appendage apd[],
					  // 					int nh, Hull h[],
					  // 					int nrenameObj, RenameObject renameObj[]
);
//处理进水点，极限静倾角，限界线，浸水开口
DLLEXPORT BOOL AddCalObj(int cmdID,int norder, int order[] ,
                        int ndel, int del[],
						int npnts, Point3D pnts[],
						int npnt, HydroInletPoint pnt[],
						int ncrv, HydroLimitAng ang[],
						int nmargin, MarginLine marginpnts[],
						int nopen, ImmersionOpen opens[]);

//*** RemoveObj：删除数据时调用 ***
DLLEXPORT void RemoveObj(int nid,int id[]);

DLLEXPORT void UnRedo(int flag, int cmdID);

//*** InitData 打开文件架构数据时调用 ***
//DLLEXPORT bool InitData(int npnt, Point3D pnt[],
//                        int ncrv, Curve crv[]
    /*,
                        int nsrf, Surface srf[],
                        int nsld, Solid sld[],
                        int nmds, MainDeckSurf mds[],
                        int nss, ShellSurf ss[],
                        int nds, DeckSurf ds[],
                        int nbs, BoundSurf bs[],
                        int nsds, SubdivSurf sds[],
                        int nocr, OpenCargoRegion ocr[],
                        int nsp, Space sp[],
                        int napd, Appendage apd[],
						int nh, Hull h[]*/
//                        );

DLLEXPORT bool InitHullData(
	vector<Hull>& h,
	vector<Space>& sp,
	vector<Appendage>& apd
);


DLLEXPORT bool InitData(vector<Point3D>& pnt,
	vector<Curve>& crv,
	vector<Surface>& srf,
	vector<Solid>& sld
	/*,
	int nsrf, Surface srf[],
	int nsld, Solid sld[],
	int nmds, MainDeckSurf mds[],
	int nss, ShellSurf ss[],
	int nds, DeckSurf ds[],
	int nbs, BoundSurf bs[],
	int nsds, SubdivSurf sds[],
	int nocr, OpenCargoRegion ocr[],
	int nsp, Space sp[],
	int napd, Appendage apd[],
	int nh, Hull h[]*/
);
//*** InitData 打开文件关于计算的数据时调用 ***
DLLEXPORT bool InitCalData(int npnt, HydroInletPoint pnt[],
	int ncrv, HydroLimitAng ang[],
	int nmargin, MarginLine marginpnts[],int nopen, ImmersionOpen opens[]);
//******************** Check *************************
//*** CheckPoint点验证，并返回点pnt： ***
DLLEXPORT BOOL CheckPoint(Point3D *pnt);

//***GetErrInfo：返回错误信息**
DLLEXPORT const char* GetErrInfo();
//重设主尺度信息
DLLEXPORT void ResetPrincipal(double loa,double lpp, double b, double d,double t, double f0x, int iFrame,int nfrm, Frame frm[],
							int nsta, Station sta[],int nwl, WaterlinePos wl[],int nbl,ButtocklinePos bl[]);
//主尺度信息
DLLEXPORT void SetPrincipal(double loa,double lpp, double b, double d,double t, double f0x, int iFrame,int nfrm, Frame frm[],
	int nsta, Station sta[],int nwl, WaterlinePos wl[],int nbl,ButtocklinePos bl[]);
//型值数据
DLLEXPORT int GetOffsetTableData(int upperDeckID, int foldingLinesID[], int isBilge, double BilgeHC, int shiptype, int asymmetricType,
                                        int ids[], int lens[], OffsetTablePoint *pnts);

//面的面积
DLLEXPORT double GetS(int id);

//体的体积
DLLEXPORT double GetV(int id);

//船壳与主甲板围成的体的体积
DLLEXPORT double GetTonnageV1();
//拓扑对象保存为step格式
DLLEXPORT bool SaveTopoToStep(char* path,int ids[]);
//拓扑对象保存为step格式，20161227 新增 by czb
DLLEXPORT bool SaveTopoToStep2(char* path);
//获取拓扑对象保存为brep格式时的OCIDX, 20161214 新增 by czb
DLLEXPORT void GetOCIDXOfTopo(int ids[]);
//拓扑对象保存为brep格式
DLLEXPORT bool SaveTopoToBrep(char* path);
//从step格式读取拓扑对象
DLLEXPORT bool LoadTopoFromStep(char* path,QVector<int> ids);

//从设置船壳静水力计算参数
DLLEXPORT bool SetHullPara(int zCnt,double zStep[],int xCnt,double xStep[],int heelCnt,double heelStep[],double heelC[],

	                        double heelFMax,double heelFMin,double heelDai,int trimCnt,double trimStep[],
							double trimFMax,double trimFMin,double trimDai,int startType);
//设置舱室静水力计算参数
DLLEXPORT bool SetCompartmentPara(int ComID,int CStatus);
DLLEXPORT bool CreateCompData();
DLLEXPORT bool CreateInterHullXml();
DLLEXPORT bool CreateInterCompXml();
DLLEXPORT bool CreateHullSolid();
//自动提取限界线，方法是把甲板沿z轴负方向移动76mm后和船壳求交得到半船壳交线，然后根据站线定义，得到每站和此交线的交点
DLLEXPORT  int GetMarginLineleData(int lens[], OffsetTablePoint *pnts);


DLLEXPORT bool CreateCXml();
//浸水开口，根据X，Y和甲板相对位置，取得实际Z位置
DLLEXPORT double GetImmersionOpenPos(double X, double Y, double oppositZ);
//加载静水力计算接口xml
DLLEXPORT void LoadCalculationXML(char* path);
//保存静水力计算接口xml
DLLEXPORT void SaveCalculationXML(char* path);
//保存静水力计算接口xml
DLLEXPORT void CloseCalulation();
//进水点计算接口
DLLEXPORT void SetInletPoint(int delpnts,Point3D delpnt[],int addpnts,Point3D addpnt[], int updCnt, int oldIDs[], Point3D newIDs[]);
//舭部点计算接口
DLLEXPORT void SetDeckBilgePoint(int Cnt, Point3D addDeck[], Point3D addBilge[]);
//导出船壳计算数据文件
//DLLEXPORT bool ExportHullCalFile(char* fileName, char* path, int hullCount, int hullIDs[]);
DLLEXPORT bool ExportHullCalFile(string fileName, string path, vector<int>& hullIDs);
//导出舱室计算数据文件
DLLEXPORT bool ExportSpaceCalFile(string fileName, string path, vector<int>& spaceIDs);
//导出体计算数据文件
DLLEXPORT bool ExportSolidCalFile(char* fileNameWithExtension, char* path,  int count, int ids[]);//20190601 added by czb
//导出计算数据文件
//DLLEXPORT void ExportIGES(char* fileName);
//获取曲线首尾端点和肋位或站位点 type=1,肋位;type=2,站位
DLLEXPORT int GetCurvePointByFS(int curveID, int xlen, double xSet[], int lens[], Point3D *pnts);
DLLEXPORT int GetCurvePointByFSEx(int curveID, int xlen, vector<double>& xSet,vector<Point3D>& pnts);

//数据接口 Lvxj
//导入型值表
DLLEXPORT void ImportOffsetData(bool bImportCtrlPnt,float xSubSectionLen);
//导出型值表
DLLEXPORT void ExportOffsetData(double* shipSize,double* expParam, int* expType);
//导入CAD文件
DLLEXPORT void ImportCAD(char* fileName);
//导入IGES文件
DLLEXPORT long ImportIGES(char* fileName, int impType, float*transfromParams);
//导出IGES文件
DLLEXPORT void ExportIGES(char* fileName,int expOption,int selectCnt,int*selectLst);
//转换CAD型线
DLLEXPORT void TransfCADLine(int selectedCnt, int* selectLst, int lineType, float* fCADPar, int lens[], Point3D *pnts);
//计算两条线交点
DLLEXPORT int GetIntersectPnt(int selectedCnt, int* selectLst,double *pPnt);
//数据接口 Lvxj

DLLEXPORT OCCStructDataMD *GetDataMD();

DLLEXPORT bool SetObjVisibel(std::vector<int>& ids,int value);

DLLEXPORT bool SetObjVisibel(int id,int value);

}